Description
Description (EN): A constant challenge in the world of glass is the manufacture of items with complex shapes. The range of existing products could be considerably extended by the use of additive manufacturing (AM), which is not yet widely used for both traditional and technical glass parts. This project aims to meet the expectations of manufacturers in the FWVL Interreg zone by promoting the development of innovative additive approaches to glass shaping.
The FWVL Interreg zone is a region with a very high concentration of glass producers/processors, a sector that has structured the local economy for over a century. To survive, the industry must keep abreast of technological developments and incorporate them as soon as they are relevant, as has been the case in our Interreg eligible area (ZE), which has historically been a pioneer in the implementation of new glassmaking techniques (the float process, mechanization of the production of cups, flasks, etc.).
It turns out that, on the one hand, glass is a material for which additive manufacturing is still in the early stages of development, while, on the other hand, the universities and research centres in the Interreg area are very active in developing additive manufacturing techniques (polymers, metals, ceramics).
This is why the VerAdMa project aims to bring together those involved in additive manufacturing research in the FWVL Interreg zone and those in the glass industry, and to develop glass AM techniques for the benefit of manufacturers in the zone, in order to broaden the range of possibilities for manufacturing glass articles:
- not only for everyday glass, particularly in luxury packaging,
- but also for technical glass applications (including optics, chemicals and pharmaceuticals).
Additive manufacturing will involve the mould on one side and the glass part on the other.
VerAdMa will focus on two distinct additive approaches - "melting" and "sintering" - for shaping glass articles.
The melting approach (VM) will take 2 forms:
- bringing glass to its melting point and then casting it in 3D printed refractory moulds using Binder Jetting (VM_1)
- using Powder Bed Fusion equipment to melt glass microbeads, suitable for forming articles layer by layer (VM_2).
The sintering (VS) approach will also take 2 forms:
- moulds printed using 3D processes, then filled with glass suspensions/precursors (VS_1)
- shaping of glass suspensions/precursors using stereolithography (VS_2).
These two approaches will be supported by the partners' skills in glass science, formulation and synthesis to match the material and manufacturing processes with the desired properties.
The different approaches will be made possible by the pre-existing level of maturity of the technological solutions that will be implemented (TRL 3-5) and by the synergies planned between partners.
To meet the expectations of the project, the INISMa, UMons, Sirris Wallonie and Sirris Vlaanderen centres in Belgium, as well as ULille and Platinium 3D in France, have decided to work in synergy to take advantage of their expertise and complementarity in 3D printing technologies and glass science. The associated operators, the MusVerre de Sars-Poteries (Fr), the Musée du Verre de Charleroi (Be), the Pôle MecaTech (Be) and EuraMaterials (Fr), will assist the research entities in disseminating and promoting the work resulting from the project to the target industries.Furthermore, InDufed, the representative of the Glass Industry Federation, supports this project due to its potential to make a significant contribution to the glass industry.
Read more Description (NL): Een constante uitdaging in de wereld van het glas is de vervaardiging van complex gevormde voorwerpen. Het bestaande productengamma zou aanzienlijk kunnen worden uitgebreid door het gebruik van additive manufacturing (AM), dat nog niet op grote schaal wordt toegepast voor zowel traditionele als technische glasonderdelen. Dit project beoogt specifiek te voldoen aan de verwachtingen van de industrie in de regio Interreg FWVL door de ontwikkeling van innovatieve additieve benaderingen voor de vormgeving van glas te bevorderen.
De Interreg-regio FWVL is een regio met een zeer hoge concentratie van glasproducenten/-verwerkers, een sector die de plaatselijke economie al meer dan een eeuw gestructureerd heeft. Om te overleven moet de industrie de technologische ontwikkelingen bijhouden en deze integreren zodra zij relevant zijn, zoals het geval is in onze in aanmerking komende zone Interreg (IAKZ), die van oudsher een pionier is bij de toepassing van nieuwe glastechnieken (het float-procedé, mechanisatie van de productie van bekers, flessen, enz.)
Het blijkt evenwel dat enerzijds glas een materiaal is waarvoor AM zich nog in een vroeg ontwikkelingsstadium bevindt, terwijl anderzijds universiteiten en onderzoekscentra in de Interreg-zone zeer actief zijn in de ontwikkeling van additive manufacturing-technieken (polymeren, metalen, keramiek).
Daarom heeft het VerAdMa-project als doel om degenen die betrokken zijn bij onderzoek naar additive manufacturing in de FWVL Interreg-zone en degenen in de glasindustrie samen te brengen en om AM-technieken voor glas te ontwikkelen ten behoeve van fabrikanten in deze zone, om het scala aan mogelijkheden voor het produceren van glasartikelen te verbreden:
- niet alleen voor alledaags glas, vooral voor luxeverpakkingen,
- maar ook voor technische glastoepassingen (waaronder de optiek, de chemie en de farmacie)
Bij additive manufacturing betreft de matrijs aan de ene kant en het glazen onderdeel aan de andere kant.
VerAdMa zal zich toeleggen op twee afzonderlijke additieve benaderingen, “smelten” en “sinteren” voor de vormgeving van glasartikelen.
De fusiebenadering (VM) zal 2 vormen aannemen:
- het glas tot het smeltpunt brengen en het vervolgens in de door middel van binder jetting 3D-geprinte vuurvaste matrijzen gieten (VM_1)
- een toestel gebruiken voor selectief lasersmelten om het smelten van glazen microkorrels die geschikt zijn voor het laag per laag vormen van artikelen te waarborgen (VM_2).
De sinterbenadering (VS) zal ook 2 vormen aannemen:
- matrijzen geprint met behulp van 3D-processen en vervolgens gevuld met glassuspensies/voorlopers (VS_1)
- vormgeving van glassuspensie/voorloper door stereolithografie (VS_2)
Deze twee benaderingen worden ondersteund door de vaardigheden van de partners op het gebied van glaskunde, formulering en synthese om het materiaal en de productieprocessen af te stemmen op de gewenste eigenschappen.
De verschillende benaderingen worden mogelijk gemaakt door het reeds bestaande maturiteitsniveau van de technologische oplossingen die zullen worden geïmplementeerd (TRL 3-5) en door de geplande synergieën tussen de partners.
Om aan de verwachtingen van het project te voldoen, hebben de centra het INISMa, de UMons, Sirris Wallonië en Sirris Vlaanderen in België, evenals de ULille en Platinium 3D in Frankrijk, besloten om in synergie samen te werken om te profiteren van hun expertise en complementariteit in 3D-printtechnologieën en glaswetenschap. De geassocieerde operatoren, het MusVerre de Sars-Poteries (Fr), het Musée du Verre van Charleroi (Be), de cluster MécaTech (Be) en EuroMaterials (Fr), zullen de onderzoeksentiteiten bijstaan in het verspreiden en promoten van het werk dat uit het project voortvloeit bij de doelindustrieën. Daarnaast steunt InDufed, de vertegenwoordiger van de Verbond van de Glasindustrie, dit project vanwege zijn aanzienlijke potentieel om bij te dragen aan de glasindustrie.
Read more Description (FR): Un défi constant dans le monde du verre est la fabrication d'articles de formes complexes. La gamme de produits existants pourrait être considérablement élargie par l'utilisation de la fabrication additive (FA) dont l’usage est encore peu répandu tant pour des pièces en verre traditionnelles que techniques. Ce projet vise précisément à répondre aux attentes des industriels de la zone Interreg FWVL en promouvant le développement d’approches additives innovantes de mise en forme du verre.
La zone Interreg FWVL est une région à très forte concentration de producteurs/transformateurs de verre, ce secteur structurant l'économie locale depuis plus d'un siècle. Pour perdurer, l'industrie doit rester au fait des développements technologiques et les intégrer dès qu'ils sont pertinents, comme cela l'a été dans notre zone éligible Interreg (ZE), historiquement pionnière dans la mise en œuvre de nouvelles techniques de fabrication verrière (le procédé float, la mécanisation de la production de gobelets, flacons, etc.).
Or il s’avère que d'une part, le verre est un matériau pour lequel la FA est encore aux premiers stades de développement alors que, d'autre part, les universités et centres de recherche de la zone Interreg sont très actifs dans le développement des techniques de fabrication additive (polymères, métaux, céramiques).
C’est pourquoi le projet VerAdMa vise à mettre en commun les acteurs de la recherche en fabrication additive de la zone Interreg FWVL et ceux de l’industrie verrière et à développer au profit des industriels de cette zone, des techniques de FA de verre pour élargir la palette des possibilités de fabrication d’articles en verre :
- non seulement pour le verre usuel, en particulier dans l’emballage de luxe,
- mais aussi pour des applications en verre technique (pour l’optique, la chimie et la pharmacie entre autres)
La fabrication additive concernera le moule d’un côté et la pièce en verre d’un autre côté.
VerAdMa se focalisera sur deux approches additives distinctes la « fusion » et le « frittage » pour la mise en forme d’articles verriers.
L’approche fusion (VM) se déclinera en 2 voies :
- porter le verre à son point de fusion puis à le couler dans des moules réfractaires imprimés en 3D par Binder Jetting (VM_1)
- exploiter un équipement de Powder Bed Fusion pour assurer la fusion de microbilles de verre, adaptées pour former des articles couche par couche (VM_2)
L’approche frittage (VS) se déclinera également en 2 voies :
- des moules imprimés par procédés 3D, puis remplis par des suspensions/précurseurs de verre (VS_1)
- mise en forme de suspension/précurseur de verre par stéréolithographie (VS_2)
Ces deux approches seront supportées par les compétences des partenaires en science du verre, formulation, synthèse de verres pour mettre en adéquation le matériau et les procédés de fabrication avec les propriétés recherchées.
La différentes approches abordées seront rendues possibles par le niveau de maturité préexistant des solutions technologiques qui seront mises en œuvre (TRL 3-5) et par les synergies prévues entre partenaires.
Pour rencontrer les attentes du projet, les centres INISMa, UMons, Sirris Wallonie et Sirris Vlaanderen en Belgique ainsi que ULille et Platinium 3D en France ont décidé d’opérer en synergie afin de tirer profit de leur expertise et complémentarité autour des technologies d’impression 3D et de la science du verre. Les opérateurs associés le MusVerre de Sars-Poteries (Fr), le Musée du Verre de Charleroi (Be), le Pôle MecaTech (Be) et EuraMaterials (Fr) assisteront les entités de recherche pour la dissémination et la valorisation des travaux issus du projet auprès des industriels cibles. De plus, InDufed, le représentant de la Fédération industriel du Verre, soutient ce projet en raison de son potentiel à contribuer de manière significative à l'industrie du verre.
Read more Actual Achievements (EN): A constant challenge in the world of glass is the manufacturing of articles with complex shapes. The VerAdMa project aims to expand the range of glass products by using additive manufacturing (AM), which is still very limited for both traditional and technical glass parts.
Indeed, the maturity stage of additive manufacturing shows significant disparities depending on the materials involved. The general public can now print polymer parts at home or in public fab labs; the aerospace industry integrates 3D-printed metal parts into its vehicles; 3D-printed ceramics are making headway in luxury jewelry, medicine, and certain high-tech industries. In contrast, glass additive manufacturing is only taking its first steps…
This is why the partners of the VerAdMa project have decided to give a boost to this technology in the glass sector, which is historically well-established in the Interreg FWVL area and has always been a pioneer in the industrial application of technological advancements in glass, such as the mechanical production of glasses and bottles and the implementation of float glass, to name just two major examples of world firsts.
The project aims to capitalize on the existing expertise in the Interreg FWVL area to bring glass additive manufacturing to industrial maturity. It focuses on two distinct additive approaches: a glass melting pathway (VM) and a sintering pathway (VS) for the shaping of glass articles. Additive manufacturing concerns either the glass object itself or the mold in which molten glass or glass precursors at room temperature are poured. The latter are then consolidated by a thermal sintering treatment at a temperature well below the melting point of glass.
The partners – INISMa (Wallonia), Platinium 3D (Grand-Est), Sirris (Flanders), Sirris (Wallonia), ULille (Hauts-de-France), and UMons (Wallonia) – interact through three main activities to successfully carry out the project:
- Binder Jetting mold printing and 3D replication of fine structures on the mold surface (INISMa, Platinium 3D, Sirris Flanders): the first castings in 3D-printed sand molds have been realized, and for the fine replication of structures, the first injection molds have been tested with polymers.
- 3D printing of glass (ULille, INISMa, Sirris Wallonia): the first tests with glass powders/beads for Powder Bed Fusion are underway and on a finer scale, the first items have been printed using VAT photopolymerization (named after the "vat" containing the material to be polymerized).
- Casting or injection of suspensions in printed or surfaced 3D molds (UMons, ULille, Sirris Flanders, INISMa): glass powders have been selected and characterized, and glass precursors are under development.
Throughout the project, the partners of VerAdMa will engage with the industrialists and craftsmen concerned by these approaches to adapt the developed solutions closely to their needs.
Of course, the IS (Individual Section) machines that produce thousands of articles per day will not be replaced at the end of this project, but we hope that the demonstrators created will encourage industrialists and craftsmen to further explore the new possibilities offered by additive manufacturing around this unique material that combines aesthetics, functionality, and durability: glass.
A constant challenge in the world of glass is the manufacturing of items with complex shapes.
While the general public can now 3D print polymer parts at home or in public fab labs; while the aerospace industry integrates 3D-printed metal components into its aircraft; and while 3D-printed ceramics are making inroads in luxury jewelry, medicine, and advanced industries — additive manufacturing (AM) of glass is still in its infancy.
At the heart of the Interreg FWVL area — a region that happens to be the birthplace of major technological innovations in the glass industry, such as the first mechanical production of glass and bottles and the first implementation of float glass — the partners of the VerAdMa project have joined forces to give new momentum to additive manufacturing in the glass sector.
The six project partners — INISMa (Wallonia), Platinium 3D (Grand Est), Sirris VL (Flanders), Sirris W (Wallonia), ULille (Hauts-de-France), and UMons (Wallonia) — are laboratories and technological centers on both sides of the French-Belgian border. They are pooling their expertise in the additive manufacturing of polymers, metals, and ceramics, as well as in material development, to bring glass additive manufacturing to industrial maturity.
The topic is addressed from several perspectives: glass can be shaped either by melting the material or by sintering (densifying the grains without complete remelting). Additive manufacturing can concern either the glass object itself or the mold used to shape it. These perspectives have been structured into three research areas in which the partners collaborate:
- 3D Printing of Molds (Platinium 3D, INISMa, Sirris VL)
Using binder jetting of sand or through fine surface structuring of molds, allowing the texture to be replicated on the cast or molded glass piece. At the current stage of the project, the first glass pieces have been successfully cast in sand molds, and the first finely structured molds have been tested — initially for molding polymers (PP and then PA).
- 3D Printing of Glass (INISMa, ULille, Sirris Wallonie)
The shaping of various glass beads and powders under different laser melting conditions using Powder Bed Fusion is being studied. On a finer scale, the first items have been printed using VAT photopolymerization (named after the “vat” containing the material to be polymerized). For both approaches, glass precursors are being developed to enhance laser–material interaction.
- Casting or Injection of Suspensions into 3D-Printed or 3D-Textured Molds (UMons, ULille, Sirris VL, INISMa)
After selecting the glass powders, suspensions are currently being developed. These will be cast into different types of molds, including finely structured ones. For this approach as well, glass precursors that can facilitate sintering are being developed.
Throughout the project, the VerAdMa partners are engaging with industrial companies and artisans concerned by these approaches — whether as producers or users — to exchange ideas, identify opportunities for implementation, and address existing needs.
For those who were unable to attend the project launch event on 9 April 2025 at the Charleroi Glass Museum, all the information is available at www.veradma.eu. Progress reports on the research will be available online from the end of January 2026.
Of course, the IS (Individual Section) machines producing thousands of bottles per day will not be replaced at the end of this project. However, it is hoped that the demonstrators developed will encourage industrial players and craftsmen to further explore the new possibilities offered by additive manufacturing around this unique material that combines aesthetics, functionality, and durability: glass.
While additive manufacturing of plastics is already within the reach of the general public, and that of metals now industrialized, it is only in its early stages for glass production.
That is why, within the Interreg FWVL territory — the historic birthplace of the industrial application of many technological advancements for glass production — the six partner laboratories and technology centres of the VerAdMa project— INISMa (Wallonia), Platinium 3D (Grand-Est), Sirris VL (Flanders), Sirris W (Wallonia), ULille (Hauts-de-France) and UMons (Wallonia) — combine their technological expertise to advance additive manufacturing technologies in the glass sector.
Three main research areas are explored during the project:
- Additive manufacturing of glass (printing via powder-bed processes, printing of glass precursors). INISMa, together with ULille and Sirris Wallonia, tests 3D printing of glass at different forming scales, using a (fine-glass-beads- or) powder-bed process of glass –this still requires significant work on the vitreous melting binder– and via VAT photopolymerisation of glass precursors. The first parts obtained using this latter technique are promising, even though they are not yet fully transparent.
- Additive manufacturing of the mould for the production of glass articles. Platinium 3D adapts 3D printing of sand moulds via Binder Jetting from the metal casting foundry sector to glass casting, with INISMa support for the glass/mould contact and the casting process. Sirris VL works on the laser texturing of the surface of metal moulds for the production of glass articles with functionalized surfaces (such as antibacterial properties, etc.). At this stage of the project, the first moulds with fine surface structuring have been tested successfully for moulding polypropylene. The testing will continue with polymers whose properties become increasingly closer to those of glass, before moving on to glass moulding.
- UMons, ULille, Sirris VL and INISMa also work on forming glass from recycled glass using processes that do not require full re-melting of the glass in order to limit energy consumption. Thanks to the continuous improvement of the glass powder suspensions since the start of the project, they can now obtain samples cast in moulds (sometimes themselves 3D-printed) that withstand sintering and show partial transparency. The development of suspensions and moulds continues.
Throughout the project, VerAdMa’s partners meet with industrial companies, craftsmen and artists, as well as producers or users of glass, who are concerned by these approaches. The exchanges around these new techniques, and the handling of the demonstration parts already developed, allow them to envision the creation of prototypes of glass models, identify opportunities for implementation, and better understand needs that can be addressed.
Follow the project’s progress and contact us at www.veradma.eu.
Read more Actual Achievements (NL): Een constante uitdaging in de glaswereld is de productie van artikelen met complexe vormen. Het VerAdMa-project heeft tot doel het assortiment glasproducten uit te breiden door gebruik te maken van additive manufacturing (AM), waarvan het gebruik nog steeds beperkt is, zowel voor traditionele als technische glascomponenten.
Inderdaad, de volwassenheid van additive manufacturing vertoont sterke verschillen afhankelijk van de betrokken materialen. Het grote publiek kan nu zelf kunststof onderdelen thuis of in openbare fab-labs 3D-printen; de luchtvaartindustrie integreert 3D-geprinte metalen onderdelen in haar voertuigen; en 3D-geprinte keramiek vindt zijn weg in de luxe juwelen, de geneeskunde en bepaalde hightechindustrieën. Additive manufacturing van glas staat daarentegen nog in de kinderschoenen.
Daarom hebben de partners van het VerAdMa-project besloten deze technologie een duwtje in de rug te geven in de glasindustrie, die historisch gezien sterk vertegenwoordigd is in het Interreg FWVL-gebied en altijd een pionier is geweest in de industriële toepassing van technologische vooruitgangen in de glasindustrie, zoals de mechanische productie van glazen en flessen en de implementatie van floatglas, om maar enkele belangrijke wereldprimeurs te noemen.
Het project is van plan om te profiteren van de bestaande expertise in het Interreg FWVL-gebied om de additive manufacturing van glas naar industriële volwassenheid te brengen. Het richt zich op twee verschillende additive benaderingen: een glasfusiepad en een glasprecursorsinterpad voor de vormgeving van glazen artikelen. Additive manufacturing betreft ofwel het glasobject zelf, ofwel de mal waarin gesmolten glas of glasprecursors bij kamertemperatuur worden gegoten. Laatstgenoemden worden vervolgens versterkt door een thermische sinterbehandeling bij een temperatuur die veel lager is dan de smelttemperatuur van glas.
De partners – INISMa (Wallonië), Platinium 3D (Grand-Est), Sirris (Vlaanderen), Sirris (Wallonië), ULille (Hauts-de-France) en UMons (Wallonië) – werken samen aan drie hoofdactiviteiten om het project tot een goed einde te brengen:
- Binder Jetting matrijsprinten en 3D replicatie van fijne structuren op het oppervlak van de matrijs (INISMa, Platinium 3D, Sirris Vlaanderen): de eerste gietingen in 3D-geprinte zandmatrijzen zijn gerealiseerd, en voor de fijne replicatie van structuren zijn de eerste spuitgietmatrijzen getest met polymeren.
- 3D-printen van glas (ULille, INISMa, Sirris Wallonië): de eerste tests met glaspoeders/-parels voor Powder Bed Fusion zijn aan de gang en op een fijnere schaal zijn de eerste artikelen geprint door middel van VAT fotopolymerisatie (genoemd naar de "vat" kuip met het te polymeriseren materiaal).
- Gieten of injecteren van suspensies in geprinte of 3D-bewerkte matrijzen (UMons, ULille, Sirris Vlaanderen, INISMa): de glaspoeders zijn geselecteerd en gekarakteriseerd, de glasprecursors zijn in ontwikkeling.
Gedurende het project zullen de partners van VerAdMa in contact komen met de betrokken industriëlen en ambachtslieden om deze benaderingen te bespreken en de ontwikkelde oplossingen zo goed mogelijk aan te passen aan de behoeften.
Natuurlijk zullen de IS (Individual Section)-machines die duizenden artikelen per dag produceren niet worden vervangen aan het einde van dit project, maar we hopen dat de gerealiseerde demonstrators de industriëlen en ambachtslieden zullen aanmoedigen verder te verkennen wat additive manufacturing te bieden heeft rond dit unieke materiaal dat esthetiek, functionaliteit en duurzaamheid combineert: glas.
Een constante uitdaging in de wereld van glas is het vervaardigen van objecten met complexe vormen.
Maar terwijl het grote publiek tegenwoordig thuis of in publieke fablabs zelf onderdelen in polymeren kan 3D-printen; terwijl de luchtvaartindustrie metalen onderdelen die via 3D-printing zijn gemaakt in haar toestellen integreert; en terwijl 3D-geprinte keramiek doorbreekt in sectoren zoals luxesieraden, geneeskunde en bepaalde hightech-industrieën, staat de additieve vervaardiging (AV) van glas nog in haar kinderschoenen…
In het hart van de Interreg FWVL-zone – een gebied dat bekendstaat als bakermat van belangrijke technologische innovaties binnen de glassector, zoals de eerste mechanische productie van glas en flessen en de eerste toepassing van floatglas – hebben de partners van het VerAdMa-project besloten de krachten te bundelen om de additieve productie in de glasindustrie te stimuleren.
De zes projectpartners, namelijk INISMa (Wallonië), Platinium 3D (Grand Est), Sirris VL (Vlaanderen), Sirris W (Wallonië), ULille (Hauts-de-France) en UMons (Wallonië), zijn onderzoekscentra en technologische instellingen aan beide zijden van de Frans-Belgische grens. Zij bouwen voort op hun technologische expertise in de additieve vervaardiging van polymeren, metalen en keramieken, evenals op hun kennis van materiaalontwikkeling, om de additieve vervaardiging van glas tot industriële rijpheid te brengen.
Het onderwerp wordt vanuit verschillende invalshoeken benaderd: glas wordt gevormd door ofwel smelten van het materiaal, ofwel door sinteren (het verdichten van de korrels zonder volledige hersmelting). Additieve vervaardiging kan betrekking hebben op het glazen object zelf of op de mal die wordt gebruikt voor de vormgeving van het glas. Deze invalshoeken zijn uitgewerkt in drie onderzoeksassen waarin de partners samenwerken:
- 3D-printen van matrijzen (Platinium 3D, INISMa, Sirris VL)
Door middel van binder jetting van zand, of via fijnstructurering van het oppervlak van de mal, zodat deze structuur kan worden overgebracht op het gegoten/geperste glasobject. Op dit moment van het project zijn de eerste glazen onderdelen gegoten in zandmatrijzen, en zijn de eerste fijn gestructureerde matrijzen getest — aanvankelijk voor het gieten van polymeren (PP en vervolgens PA).
- 3D-printen van glas (INISMa, ULille, Sirris Wallonie)
De vormgeving van verschillende glasparels en -poeders onder diverse laserfusieomstandigheden via Powder Bed Fusion wordt onderzocht. Op kleinere schaal zijn de eerste stukken geprint via vat-photopolymerisatie (genoemd naar het reservoir “vat” waarin het te polymeriseren materiaal zich bevindt). Voor beide benaderingen worden glasprecursoren ontwikkeld die de interactie tussen laser en materiaal bevorderen.
- Gieten of injecteren van suspensies in 3D-geprinte of 3D-gestructureerde matrijzen (UMons, ULille, Sirris VL, INISMa)
Na selectie van de glaspoeders worden momenteel suspensies ontwikkeld. Deze zullen worden gegoten in verschillende types matrijzen, waaronder fijn gestructureerde. Ook voor deze aanpak worden glasprecursoren ontwikkeld die het sinteren kunnen vergemakkelijken.
Gedurende het hele project gaan de partners van VerAdMa in gesprek met industriële spelers en ambachtslieden die bij deze technieken betrokken zijn – zowel als producenten als gebruikers – om ervaringen uit te wisselen, nieuwe toepassingsmogelijkheden te identificeren en te kijken hoe deze technologieën in hun behoeften kunnen voorzien.
Voor wie niet aanwezig kon zijn bij de lancering van het project op 9 april 2025, is alle informatie beschikbaar op www.veradma.eu. De voortgang van het onderzoek zal vanaf eind januari 2026 online te volgen zijn.
Natuurlijk zullen de IS-machines (Individual Section), die dagelijks duizenden flessen produceren, niet worden vervangen aan het einde van dit project. Maar we hopen dat de gerealiseerde demonstratoren industriëlen en ambachtslieden zullen aanmoedigen om verder te experimenteren met de nieuwe mogelijkheden die additieve vervaardiging biedt rond dit unieke materiaal dat esthetiek, functionaliteit en duurzaamheid combineert: glas.
Terwijl additive manufacturing (AM) van kunststof al tot het grote publiek is doorgedrongen, is die van metalen inmiddels op industriële schaal toegepast, deze techniek is voor glas voorlopig nog in een beginfase verkeert.
Daarom bundelen, binnen het Interreg FWVL-gebied — de historische bakermat van de industriële toepassing van talloze technologische ontwikkelingen voor de glasproductie — de zes partnerlaboratoria en technologische centra van het VerAdMa-project hun technologische knowhow: INISMa (Wallonië), Platinium 3D (Grand-Est), Sirris VL (Vlaanderen), Sirris W (Wallonië), ULille (Hauts-de-France) en UMons (Wallonië). Hun doel is de technologieën voor AM in de glassector verder te ontwikkelen.
Tijdens het project worden drie hoofdonderzoeksassen verkend:
- Glas additive manufacturing (printen via poederbedprocessen, printen van glasprecursoren). INISMa, samen met ULille en Sirris Wallonië, testen 3D-printen van glas op verschillende schaalniveaus van de vormgeving, via een poederbedproces (of fijne glasparrels) van glas. Dit vergt echter nog aanzienlijk werk rond het smeltende bindmiddel voor glasachtige verbindingen, en via VAT-fotopolymerisatie van glasprecursoren. De eerste onderdelen die via deze laatste techniek worden verkregen, zijn veelbelovend, al zijn ze nog niet volledig transparant.
- Additive manufacturing van de matrijs voor de productie van glasartikelen. Platinium 3D past het 3D-printen van zandmatrijzen (Binder Jetting) uit de metaalgieterijsector aan voor het gieten van glas, met ondersteuning van INISMa voor het contact glas/matrijs en het gietproces. Sirris VL werkt aan de lasertexturering van het oppervlak van metalen matrijzen voor de productie van glasartikelen met functionele oppervlakken (zoals antibacteriële eigenschappen, enz.). In het huidige stadium van het project zijn de eerste matrijzen met een fijn oppervlaktestructuur met succes getest voor het mallen van polypropyleen. De tests worden voortgezet met polymeren waarvan de eigenschappen steeds dichter bij die van glas liggen, voordat wordt overgestapt op glas.
- De partners UMons, ULille, Sirris VL en INISMa werken ook aan het vormen van glas op basis van gerecycleerd glas, via processen waarvoor geen volledige herverhitting van het glas nodig is, om zo het energieverbruik te beperken. Dankzij de voortdurende verbetering van de glaspoeder-suspensies sinds het begin van het project kunnen ze nu in matrijzen (soms zelf ook 3D-geprint) gegoten pellets verkrijgen die standhouden tijdens het sinteren en beginnen transparant te worden. De ontwikkeling van suspensies en matrijzen gaat verder.
Gedurende het hele project gaan de partners van VerAdMa in gesprek met industriële bedrijven, ambachtslieden en kunstenaars, producenten of gebruikers van glas, die met deze benaderingen te maken hebben. Door de uitwisseling rond deze nieuwe technieken, en door het hanteren van de reeds gemaakte demonstratieonderdelen, kunnen ze vooruitkijken naar de ontwikkeling van prototypes van glasmodellen, kansen voor de implementatie ontdekken en inzicht krijgen in behoeften die kunnen worden ingevuld.
Volg de voortgang van het project en neem contact met ons op via www.veradma.eu.
Read more Actual Achievements (FR): Un défi constant dans le monde du verre est la fabrication d'articles de formes complexes. Le projet VerAdMa vise à élargir la gamme de produits verriers par l'utilisation de la fabrication additive (FA) dont l’usage est encore peu répandu tant pour des pièces en verre traditionnelles que techniques.
En effet, le stade de maturité de la fabrication additive présente de fortes disparités en fonction des matériaux concernés. Le grand public peut désormais imprimer lui-même des pièces en polymères à domicile ou dans des fab-labs publics ; l'industrie aéronautique intègre des pièces métalliques imprimées 3D dans ses engins ; la céramique imprimée en 3D perce dans les secteurs de la bijouterie de luxe, de la médecine et certaines industries de pointe. En revanche la fabrication additive de verre est encore balbutiante…
C'est pourquoi les partenaires du projet VerAdMa ont décidé de donner de l'élan à cette technologie dans le secteur verrier, qui est historiquement très implanté dans la zone Interreg FWVL et s'est toujours montré pionnier dans l'application industrielle des avancées technologiques verrières, par exemple la production mécanique des verres et bouteilles et la mise en œuvre du verre float pour ne citer que ces deux exemples majeurs de premières mondiales.
Le projet se propose de capitaliser sur les expertises existantes dans la zone Interreg FWVL, afin d’amener à maturité industrielle la fabrication additive "verre". Il se focalise sur les deux approches additives distinctes : une voie fusion du verre (VM) et une voie frittage (VS) pour la mise en forme d’articles verriers. La fabrication additive concerne soit l'objet en verre, soit le moule dans lequel est coulé du verre en fusion ou des précurseurs de verre à température ambiante. Ces derniers sont consolidés ensuite par un traitement thermique de frittage à température bien inférieure à la fusion du verre.
Les partenaires –INISMa (Wallonie), Platinium 3D (Grand-Est), Sirris (Flandre), Sirris (Wallonie), ULille (Hauts-de-France) et UMons (Wallonie)– interagissent suivant trois activités principales pour mener à bien le projet :
- Impression de moules par Binder Jetting et réplication 3D de structures fines à la surface de moule (INISMa, Platinium 3D, Sirris Flandre) : les premiers coulages en moules de sable imprimés 3D ont été réalisés d'une part et, pour la réplication fine de structures, les premiers moules d'injection ont été testés avec des polymères.
- Impression 3D de verre (ULille, INISMa, Sirris Wallonie) : les premiers tests de poudres/billes de verre pour le Powder Bed Fusion sont en cours et à une échelle plus fine, les premiers articles ont été imprimés par VAT-photopolymérisation (du nom du récipient "vat" qui contient la matière à polymériser).
- Coulage ou injection de suspensions en moules imprimés ou surfacés en 3D (UMons, ULille, Sirris Flandre, INISMa): les poudres de verre ont été sélectionnées et caractérisées, les précurseurs de verre sont en court de développement.
Tout au long du projet, les partenaires de VerAdMa vont à la rencontre des industriels et artisans concernés par ces approches tout au long du projet pour permettre d'adapter les solutions développées au plus près des besoins.
Bien sûr les machines IS (Individual Section) aux milliers d'articles produits par jour ne seront pas remplacées à l'issue de ce projet, mais nous espérons que les démonstrateurs réalisés inciteront les industriels et artisans à explorer plus avant les nouvelles possibilités offertes par la fabrication additive autour de cette matière unique qui combine esthétique, fonctionnalité et durabilité : le verre.
Un défi constant dans le monde du verre est la fabrication d'articles de formes complexes.
Mais si le grand public peut désormais imprimer lui-même des pièces en polymères à domicile ou dans des fab-labs publics ; si l'industrie aéronautique intègre des pièces métalliques imprimées 3D dans ses engins ; si la céramique imprimée en 3D perce dans les secteurs de la bijouterie de luxe, de la médecine et certaines industries de pointe ; en revanche la fabrication additive (FA) de verre est encore balbutiante…
C'est au cœur de la zone Intererreg FWVL, qui se trouve être le territoire de mise en œuvre d'innovations technologiques majeures de l'industrie verrière, notamment les premières productions mécaniques de verres et bouteilles et la première mise en œuvre du verre plat flotté, que les partenaires du projet VerAdMa ont décidé de s'unir pour donner de l'élan à la fabrication additive dans le secteur verrier.
Les 6 partenaires du projet, à savoir INISMa (Wallonie), Platinium 3D (Grand-Est), Sirris VL (Flandre), Sirris W (Wallonie), ULille (Hauts-de-France) et UMons (Wallonie) sont des laboratoires et centres technologiques des deux côtés de la frontière franco-belge qui capitalisent ici sur leurs savoir-faire technologiques dans la FA de polymères, métaux et céramiques et le développement de matériaux, pour amener à maturité industrielle la fabrication additive "verre".
Le sujet est traité sous plusieurs angles : le verre est mis en forme soit par fusion de la matière soit par frittage (densification des grains de matière sans refusion totale) et la fabrication additive concerne soit l'objet en verre lui-même, soit le moule utilisé pour la mise en forme de l'objet en verre. Et ces angles ont été structurés en 3 axes de recherche dans lesquels les partenaires interagissent :
- Impression 3D de moules (Platinium 3D, INISMa, Sirris VL) soit par Binder Jetting de sable, soit par impression et/ou structuration fine de la surface de moule pour la répliquer sur la pièce coulée/moulée. Au stade actuel du projet, les premières pièces en verre coulées en moules de sable ont été réalisées et les premiers moules à structuration fine ont été testés dans un premier temps pour le moulage de polymères (PP puis PA).
- Impression 3D de verre (INISMa, ULille, Sirris Wallonie) : la mise en forme de différentes billes et poudre de verre sous différentes conditions de fusion laser par Powder Bed Fusion est étudiée et, à une échelle plus fine, les premiers articles ont été imprimés par VAT-photopolymérisation (du nom du récipient "vat" qui contient la matière à polymériser). Pour ces deux voies, des précurseurs de verre pour favoriser l'interaction laser/matière sont développés.
- Coulage ou injection de suspensions en moules imprimés ou surfacés en 3D (UMons, ULille, Sirris VL, INISMa): après la sélection des poudres de verre, les suspensions sont en cours de développement. Elles seront coulées dans différents types de moules, dont ceux finement structurés. Pour cette voie également, des précurseurs de verre qui pourront aider au frittage seront développés.
Tout au long du projet, les partenaires de VerAdMa vont à la rencontre des industriels et artisans concernés par ces approches comme producteurs ou utilisateurs et échanger sur ces nouvelles techniques, leur trouver des opportunités de mise en œuvre et de couverture des besoins.
Pour ceux qui n'ont pas eu l'occasion d'assister à l'événement de lancement du projet le 09/04/2025 au Musée du Verre de Charleroi, toutes les informations sont disponibles sur www.veradma.eu. Le suivi de l'avancement des recherches sera disponible en ligne dès fin janvier 2026.
Bien sûr les machines IS (Individual Section) aux milliers de bouteilles produites par jour ne seront pas remplacées à l'issue de ce projet, mais nous espérons que les démonstrateurs réalisés inciteront les industriels et artisans à explorer plus avant les nouvelles possibilités offertes par la fabrication additive autour de cette matière unique qui combine esthétique, fonctionnalité et durabilité : le verre.
Si la fabrication additive de plastique est dans le domaine du grand public, celle des métaux industrialisée, elle n'est encore que balbutiante pour la production de verre.
C'est pourquoi, sur le territoire Interreg FWVL, berceau historique de l'application industrielle de nombreuses avancées technologiques pour la production de verre, les six laboratoires et centres technologiques partenaires du projet VerAdMa –INISMa (Wallonie), Platinium 3D (Grand-Est), Sirris VL (Flandre), Sirris W (Wallonie), ULille (Hauts-de-France) et UMons (Wallonie)– unissent leurs savoir-faire technologiques pour faire progresser les technologies de fabrication additive dans le secteur verrier.
Trois axes principaux sont explorés au cours du projet :
- la fabrication additive du verre (impression par procédés lit de poudre, impression de précurseurs de verre). INISMa, avec ULille et Sirris Wallonie testent l'impression 3D de verre à des échelles de mise en forme différentes, par procédé lit de poudre (ou fines billes) de verre, qui demande encore un travail important sur le liant fondant vitreux et par VAT-photopolymérisation de précurseurs de verre. Les premières pièces obtenues par cette dernière technique sont prometteuses même si elles ne sont pas encore complètement transparentes
- la fabrication additive du moule pour la production d'articles en verre. Platinium 3D adapte l'impression 3D de moules de sable par Binder Jetting de la fonderie métallurgique au coulage du verre, assisté par INISMa pour le contact verre/moule et la coulée. Sirris VL travaille à la texturation au laser de la surface de moules métalliques pour la production d'articles en verre à surface fonctionnalisée comme antibactérienne, etc.). Au stade actuel du projet, les premiers moules à structuration fine de surface ont été testés avec succès pour le moulage de polypropylène. Les essais vont se poursuivre sur des polymères aux propiétés de plus en plus plus proches de celles du verre avant de passer au moulage de verre.
- Les partenaires UMons, ULille, Sirris VL, INISMa travaillent également à la mise en forme de verre à partir de verre recyclé par des procédés qui ne demandent pas la refusion complète du verre pour limiter la consommation d'énergie. L'amélioration constante des suspensions de poudre de verre depuis le début du projet leur permet maintenant d'obtenir des pastilles coulées dans des moules (parfois eux-mêmes imprimés en 3D) qui se tiennent au frittage et commencent à être transparentes. Le développement des suspensions et des moules se poursuit.
Tout au long du projet, les partenaires de VerAdMa vont à la rencontre des industriels, artisans et artistes, producteurs ou utilisateurs de verre, concernés par ces approches. Les échanges autour de ces nouvelles techniques, la manipulation des pièces démonstrateurs déjà réalisées, leur permettent de projeter la réalisation de prototypes de modèles en verre, de découvrir des opportunités de mise en œuvre et de couverture de besoins.
Suivez la progression du projet et contactez-nous sur www.veradma.eu.
Read more Project outputs:
Les organisations qui coopèrent par-delà les frontières (FR)
Organisaties die over de grenzen samenwerken(NL)
Réalisation d'évènements transfrontaliers(FR)
Grensoverschrijdende evenementen(NL)
Participants aux manifestations transfrontalières (FR)
Deelnemers aan grensoverschrijdende evenementen(NL)
LinkedIn communicatie over het VerAdMa-project(NL)
Communication LinkedIn du projet VerAdMa(FR)
Nombre de visiteurs du site web(FR)
Aantal bezoekers op de website(NL)
Proefprojecten die gezamenlijk door de partners zijn ontwikkeld(NL)
Actions pilotes élaborées conjointement par les partenaires(FR)
Opérateurs de recherche impliqués dans VerAdMa(FR)
Onderzoeksinstellingen die deelnemen aan gemeenschappelijke onderzoeksprojecten(NL)
Création d'un réseau d'innovation transfrontalier sur la fabrication additive dans l'industrie du verre(FR)
Oprichting van een grensoverschrijdend innovatienetwerk voor additieve vervaardiging in de glasindustrie(NL)
Aantal bedrijven dat deelneemt aan proefprojecten(NL)
Nombre d’entreprises participants à des actions pilotes(FR)