Description
Description (CS): Programová oblast trpí nerovnoměrným rozložením lékařské a terapeutické péče soustředěné do velkých měst. Tato výzva je umocněna negativními vlivy pandemie na danou situaci a přístup k již existujícím preventivním opatřením. Navrhovaný projekt řeší výzvu vyplývající ze situace v příhraničním regionu zvýšením informovanosti u cílových skupin a rozvojem personalizované a účinné prevence poruch pánevního dna. Má velký potenciál pro zlepšení individuální kvality života a snížení zátěže zdravotnického systému. Nejdůležitější technologickou aktivitou a výstupem projektu je vývoj a implementace modulárního systému pro zlepšení prevence poruch pánevního dna. Komunikační, diseminační a exploatační aktivity zpřístupní informace cílovým skupinám a vyvinutá technologie bude prezentována jako funkční prototyp s přímým dopadem na programovou oblast. Odlišné postupy a standardy péče vyžadují přeshraniční spolupráci, která řeší společný problém. Moderní a inovativní řešení jsou očekávána díky kombinaci jedinečných dovedností projektových partnerů na obou stranách hranice. Projekt se primárně zaměřuje na zdravé ženy ve věku 18-45 let. Dalšími cílovými skupinami jsou studenti medicíny, zdravotnických studií a průmyslového designu, učitelé a vychovatelé, fyzioterapeuti a gynekologové, výzkumné a vzdělávací organizace a malé a střední podniky.
Read more Description (DE): Im Programmgebiet liegt eine ungleiche regionale Verteilung der medizinischen und therapeutischen Versorgung vor. Die Verfügbarkeit von Präventionsmaßnahmen ist nicht überall gewährleistet. Das vorgeschlagene Projekt geht diese Herausforderung für die Volkskrankheit Beckenbodenbeschwerden an, indem es Zielgruppen sensibilisiert und eine personalisierte und wirksame Prävention entwickelt. Dadurch ergibt sich ein großes Potenzial für die Verbesserung der individuellen Lebensqualität und der Entlastung des Gesundheitssystems. Das wichtigste technologische Ziel des Projekts ist die Entwicklung und die Einführung eines modularen Feedbacksystems zur personalisierten Prävention. Durch vielfältige Kommunikations- und Disseminationsaktivitäten werden die Projektzwischenstände und -ergebnisse spezifisch für die Zielgruppen und die Programmregion zugänglich gemacht. Die unterschiedlichen Verfahren und Pflegestandards erfordern hierbei eine grenzüberschreitende Zusammenarbeit. Durch die Kombination der hochspezialisierten Fähigkeiten der Projektpartner auf beiden Seiten der Grenze sind hochtechnologische und innovative Lösungen erwartbar. In einem ersten Ansatz adressiert das Projekt gesunde Frauen im Alter von 18-
45. Weitere Zielgruppen sind Studierende der Medizin, des Gesundheitswesens und des Industriedesigns, Lehrer und Erzieher, Physiotherapeuten, Gynäkologen, Forschungs- und Bildungseinrichtungen sowie kleine und mittlere Unternehmen als Folgenutzer der entwickelten Technologie.
Read more Description (EN): The program area suffers from uneven distribution of medical and therapeutic care concentrated to big cities. This challenge is amplified by the negative impact of the pandemic on the situation and access to already existing preventive measures. The proposed project addresses this challenge by increasing awareness within target groups and by developing personalized and effective prevention of pelvic floor disorders. It has a great potential for improving individual quality of life and reducing the healthcare system burden. The most important technological activity and output of the project is the development and implementation of a modular system to improve the prevention of pelvic floor disorders. Communication, dissemination and exploitation activities will make the information available to the target groups and the developed technology will be presented as a functional prototype with a direct impact on the program area. Different procedures and standards of care require cross-border collaboration addressing the common challenge. Modern and innovative solutions are expected thanks to the combination of unique skills of project partners on both sides of the border. In a first approach, the project addresses healthy women aged 18-
45. Other target groups involve students of medicine, healthcare studies and industrial design, teachers and educators, physiotherapists and gynecologists, research and educational organizations and small and middle size enterprises.
Read more Actual Achievements (CS): Hlavním cílem tohoto projektu je přispět k prevenci dysfunkcí pánevního dna. V rámci projektu budou využity pokročilé technologie pro vyvinutí prototypu zpětnovazebního tréninkového systému. Ten umožní vyhodnotit vliv předepsaných cviků a každodenních pohybů na zátěž v pánevním dnu neinvazivním způsobem. Získaná data poslouží koncovému uživateli pro stanovení vhodného cvičení pro prevenci poruch pánevního dna.
Aby byl tento cíl splněn, je zapotřebí spolupráce odborníků z několika oborů. V tomto projektu spolupracují týmy z OTH Regensburg (DE), ZČU (CZ) a LF UK (CZ). OTH jsou experti na svalově-kosterní modely a snímání pohybu, jejich oddělení porodní asistence pak přispívá medicínskými poznatky. V rámci ZČU jsou zapojeny týmy z NTC a FDU. NTC má bohaté zkušenosti v oblasti modelování lidského těla a vývoji senzorů, FDU je odpovědný za návrh designu řešení. Neodmyslitelným partnerem v tomto projektu je LF UK poskytující potřebnou lékařskou expertízu. Pro zajištění skutečně pevné spolupráce byly stanoveny pravidelné projektové schůze každý měsíc. Těch se účastní všichni projektoví partneři a jsou na nich diskutovány aktuální pracovní aktivity a úkoly.
První monitorovací období bylo stanoveno 12.12.2022 – 31.3.2024, nicméně řešení samotného projektu začalo 1.7.2023. Tímto datem začaly přípravné práce jednotlivých partnerů v rámci stanovených aktivit. První společná schůze všech partnerů pak proběhla dne 8.8.2023 na půdě ZČU. Zde si partneři stanovili konkrétní úkoly. K těm hlavním v rámci prvního monitorovacího období patřilo například vývoj modelu zatížení pánevního dna a vývoj submodelu kontrakce svalů pánevního dna. Na těchto aktivitách spolupracovali odborníci z NTC ZČU se svými německými partnery z OTH, kteří vyvíjejí vzájemně se doplňující modely. Výstupy svalově-kosterního modelu OTH budou v projektu sloužit jako vstupní data pro model kontrakce vyvíjený na ZČU. Celkově je tato modelovací aktivita nezbytná pro pochopení, jak kontrakce svalů pánevního dna souvisí s měřitelnými pohyby vybraných bodů (tzv. landmarků) na povrchu těla. Nezbytností při vývoji biomechanických modelů byla úzká spolupráce s lékaři z LF UK, kteří přispívají svými znalostmi při tvorbě geometrie modelu a určování relevantních svalů a jejich funkcí.
Důležitým milníkem v průběhu prvního monitorovacího období bylo uspořádání workshopu dne 5.12.2023 na půdě FDU, viz přiložené foto. Smyslem workshopu bylo představení hlavního cíle a myšlenek projektu odborné veřejnosti a diskuze o potřebách cílových skupin. Tedy co by měl výstup projektu (zpětnovazební tréninkový systém) splňovat z pohledu koncových uživatelů. Tohoto workshopu se účastnili zástupci všech partnerů projektu a dále pak pozvaní zástupci odborné veřejnosti z řad "stakeholderů", tedy zainteresovaných stran včetně cílových skupin. Jednalo se jak o lékaře a zdravotnický personál, odborníky z oblasti fyzioterapie, tak i zástupce rozvojových agentur, klastrů a studentů. Výstup workshopu, tedy soubor požadavků na snímací systém, se tak opíral o širokou základnu účastníků a poskytl data pro vývoj designu zařízení. Podobný workshop byl uspořádán také na německé straně v Regensburgu dne 14.3.2024. Inženýři a vědci z biomechanické laboratoře se setkali s lékařskými odborníky z oblasti fyzioterapie, porodnictví, osteopatie a anatomie, aby prodiskutovali jejich požadavky a potřeby na preventivní nástroj.
S využitím všech těchto poznatků včetně znalostí lékařů LF UK a znalostí odborníků z oddělení porodní asistence OTH byl zahájen samotný vývoj snímacího systému. Jedná se o první fázi vývoje tréninkového nástroje. Snímací systém bude vyhodnocovat pohyby stanovených landmarků při cvičení. Tento vývoj byl zahájen ve spolupráci týmů FDU a NTC s přispěním LF UK.
V průběhu druhého monitorovacího období, tedy 1.4.2024 – 31.12.2024 probíhalo řešení projektu v plynulé návaznosti na práce v předchozím období. Jednalo se zejména dva směry, které byly v rámci projektu rozvíjeny.
V oblasti modelování byly dále vyvíjeny a zdokonalovány virtuální modely zapojených partnerů ZČU (CZ) a OTH (DE). Na straně ZČU byl i nadále vytvářen submodel kontrakce svalů pánevního dna, zatímco na straně OTH byl vytvářen a vylepšován svalově-kosterní model. Oba modelové přístupy jsou vzájemně komplementární, tedy výstupy ze svalově-kosterního modelu OTH budou sloužit jako vstupy submodelu ZČU. K zajištění harmonizace obou modelových přístupů je nezbytná těsná spolupráce ZČU a OTH. Neodmyslitelným partnerem je v této oblasti LF UK (CZ) poskytující lékařskou expertízu. Průběžné výsledky této spolupráce byly prezentovány na významné evropské konferenci zaměřené na biomechaniku, ESB 2024.
Hlavním cílem projektu je vyvinutí tréninkového nástroje pro správné cvičení svalů pánevního dna. V průběhu druhého monitorovacího období došlo k návrhu a vytvoření prvního fyzického prototypu. K tomu byly využity poznatky získané v předchozím období. Prototyp byl vyvinut na půdě ZČU. Proběhlo i první testování jeho funkčnosti.
Stejně jako v prvním období byl v průběhu druhého uspořádán workshop dne 19.11.2024 na půdě ZČU, viz přiložené foto. Smyslem workshopu bylo představení průběhu projektu a další zpřesňování potřeb cílových skupin. Tedy co by měl výstup projektu (zpětnovazební tréninkový systém) splňovat z pohledu koncových uživatelů. Tohoto workshopu se opět účastnili zástupci všech partnerů projektu a dále pak pozvaní zástupci odborné veřejnosti z řad "stakeholderů", tedy zainteresovaných stran včetně cílových skupin. Jednalo se jak o lékaře a zdravotnický personál, odborníky z oblasti fyzioterapie, tak i zástupce rozvojových agentur, klastrů a studentů.
V průběhu třetího monitorovacího období, tedy 1.1.2025 – 30.9.2025 pokračovalo řešení projektu v úzké spolupráci české a bavorské strany.
V oblasti modelování byly dále zdokonalovány virtuální modely zapojených partnerů ZČU (CZ) a OTH (DE). Modelové přístupy se navzájem doplňují, neboť se jedná o submodel kontrakce svalů pánevního dna na straně ZČU a svalově-kosterní model na straně OTH. Jako podklady při vývoji těchto modelů slouží lékařská expertíza dalšího z partnerů, LF UK (CZ). Výsledky této spolupráce byly prezentovány odborné komunitě na významné mezinárodní vědecké konferenci International Society of Biomechanics 2025, která se konala 27.-31.7.2025 ve švédském Stockholmu.
Hlavním cílem projektu je vyvinutí tréninkového nástroje pro správné cvičení svalů pánevního dna. V průběhu třetího monitorovacího období bylo zahájeno rozsáhlejší měření s dobrovolníky na půdě OTH pro získání relevantních dat o zatížení pánevního dna, která budou dále využita při vývoji přístroje. Při těchto měřeních byla získávána i data celkového pohybu lidského těla a ultrazvuková data, na kterých lze kontrakce svalů pánevního dna přímo ověřit.
Průběh řešení projektu a jeho výsledky byly průběžně představovány nejen odborné, ale také široké veřejnosti a to například na akci Česko-Bavorský den ve Vimperku dne 21.6.2025 a na akci Den vědy na Náměstí Republiky v Plzni dne 19.9.2025.
Read more Actual Achievements (DE): Hauptziel dieses Projekts ist es, einen Beitrag zur Prävention von Beckenbodendysfunktionen zu leisten. Im Rahmen des Projekts werden fortschrittliche Technologien eingesetzt, um einen Prototyp eines Feedback-Trainingssystems zu entwickeln. Dieses wird es ermöglichen, die Wirkung von vorgeschriebenen Trainingsübungen und alltäglichen Bewegungen auf die Belastung des Beckenbodens auf nicht-invasive Weise zu bewerten. Die gewonnenen Daten dienen dazu, geeignete Übungen zur Vorbeugung von Beckenbodenstörungen zu bestimmen.
Um dieses Ziel zu erreichen, ist die Zusammenarbeit von Experten aus verschiedenen Bereichen erforderlich. In diesem Projekt arbeiten Teams der OTH Regensburg (DE), der ZČU (CZ) und der LF UK (CZ) zusammen. Das Labor für Biomechanik der OTH verfügt über langjährige Erfahrung bei der Erstellung von muskuloskelettalen Simulationsmodellen sowie mit der Erfassung von Bewegungen, während die Hebammenabteilung medizinisches Wissen beisteuert. Von der ZČU sind Teams des NTC und der FDU beteiligt. Das NTC verfügt über umfangreiche Erfahrungen in der Modellierung des menschlichen Körpers und der Entwicklung von Sensoren. Die FDU ist für die Konzeption der entwickelten Lösung verantwortlich. Ein unverzichtbarer Partner in diesem Projekt ist die medizinische Fakultät der Karls-Universität, die das notwendige medizinische Fachwissen bereitstellt. Um eine enge Zusammenarbeit zu gewährleisten, wurden regelmäßige, monatliche Projekttreffen eingerichtet. Bei diesen Meetings, an denen alle Projektpartner teilnehmen, werden die aktuellen Arbeitsaktivitäten, Aufgaben und Fortschritte besprochen.
Der erste Überwachungszeitraum wurde für den 12.12.2022 - 31.3.2024 festgelegt. Das Projekt begann am 1.7.2023. Zu diesem Zeitpunkt begannen die Vorbereitungsarbeiten der einzelnen Partner im Rahmen der festgelegten Aktivitäten. Das erste gemeinsame Treffen aller Partner fand am 8.8.2023 an der Westböhmischen Universität statt, wo die Partner spezifische Aufgaben festlegten. Zu den wichtigsten Aufgaben im ersten Beobachtungszeitraum gehörten beispielsweise die Entwicklung eines Modells zur Simulation des Beckenbodens und dessen Belastungen sowie die Entwicklung eines Teilmodells der Beckenbodenmuskelkontraktion. Bei diesen Aktivitäten arbeiteten die Experten des NTC ZČU mit den Partnern der OTH zusammen, um ergänzende Modelle zu entwickeln. Die Ergebnisse des muskuloskelettalen Modells der OTH werden als Eingangsdaten für das Kontraktionsmodell dienen, das am NTC entwickelt wird. Insgesamt ist diese Modellierungstätigkeit wesentlich für das Verständnis des Zusammenhangs zwischen der Kontraktion der Beckenbodenmuskulatur und messbaren Bewegungen ausgewählter Punkte auf der Körperoberfläche, so genannte Landmarken. Eine Notwendigkeit bei der Entwicklung der biomechanischen Modelle war die enge Zusammenarbeit mit Ärzten der medizinischen Fakultät, die ihr Wissen bei der Entwicklung der Modellgeometrie und der Identifizierung der relevanten Muskeln und ihrer Funktionen einbringen.
Ein wichtiger Meilenstein während des ersten Überwachungszeitraums war die Organisation von Workshops mit dem Ziel, das Hauptziel und die Ideen des Projekts der Fachwelt vorzustellen und die Bedürfnisse der Zielgruppen zu diskutieren. Es sollte herausgefunden werden, was das Endprodukt des Projektes (Feedback-Trainingssystem) aus der Sicht der Endnutzer erfüllen sollte. Der erste Workshop fand am 5.12.2023 an der FDU statt (siehe beigefügtes Foto). An diesem Workshop nahmen Vertreter aller Projektpartner teil und luden Vertreter der Fachöffentlichkeit aus den Reihen der „Stakeholder“, d.h. der interessierten Parteien einschließlich der Zielgruppen, ein. Dazu gehörten Ärzte und medizinisches Personal, Fachleute aus der Physiotherapie sowie Vertreter von Entwicklungsagenturen, Clustern und Studenten. Das Ergebnis des Workshops, eine Reihe von Anforderungen an das Sensorsystem, stützt sich somit auf eine breite Basis von Teilnehmern und liefert Daten für die Entwicklung des Gerätedesigns. Ein ähnlicher Workshop wurde auch auf deutscher Seite am 14. März 2024 in Regensburg organisiert. Ingenieure und Wissenschaftler des biomechanischen Labors trafen sich mit medizinischen Experten aus den Bereichen Physiotherapie, Geburtshilfe, Osteopathie und Anatomie, um ihre Anforderungen und Bedürfnisse für ein Präventionsinstrument zu diskutieren.
Unter Nutzung all dieser Kenntnisse, einschließlich des Wissens der Ärzte der medizinischen Fakultät der Karls-Universität und des Wissens der Experten aus der Hebammenabteilung der OTH, wurde mit der Entwicklung des Sensorsystems begonnen. Dies ist die erste Phase der Entwicklung des Feedback-Trainingssystems. Dieses Erfassungssystem wird die Bewegungen der festgelegten Landmarken am Körper während des Trainings auswerten. Diese Entwicklung wurde in Zusammenarbeit zwischen den Teams der FDU und des NTC mit Unterstützung der LF UK eingeleitet.
Während des zweiten Überwachungszeitraums, d.h. vom 1.4.2024 bis zum 31.12.2024, wurde das Projekt in nahtloser Kontinuität mit der Arbeit im vorangegangenen Zeitraum weitergeführt. Im Rahmen des Projekts wurde insbesondere in zwei Richtungen entwickelt.
Im Bereich der Modellierung wurden die virtuellen Modelle der beteiligten Partner UWB (CZ) und OTH (DE) weiter entwickelt und verbessert. Auf Seiten der UWB wurde das Teilmodell der Beckenbodenmuskelkontraktion weiterentwickelt, während auf Seiten der OTH das muskuloskelettale Modell entwickelt und verbessert wurde. Die beiden Modellierungsansätze sind komplementär, d.h. die Ergebnisse des OTH-Muskel-Skelett-Modells dienen als Input für das WCU-Submodell. Eine enge Zusammenarbeit zwischen WCU und OTH ist notwendig, um die Harmonisierung der beiden Modellierungsansätze zu gewährleisten. Ein unverzichtbarer Partner in diesem Bereich ist die Medizinische Fakultät der Karls-Universität (CZ), die medizinisches Fachwissen zur Verfügung stellt. Zwischenergebnisse dieser Zusammenarbeit wurden auf einer großen europäischen Konferenz für Biomechanik, der ESB 2024, vorgestellt.
Das Hauptziel des Projekts ist die Entwicklung eines Trainingsgeräts für das korrekte Training der Beckenbodenmuskulatur. Während des zweiten Überwachungszeitraums wurde der erste physische Prototyp entworfen und erstellt. Dabei wurden die im vorangegangenen Zeitraum gewonnenen Erkenntnisse genutzt. Der Prototyp wurde an der Westböhmischen Universität entwickelt. Die ersten Tests seiner Funktionalität fanden statt.
Wie in der ersten Periode wurde auch in der zweiten Periode am 19.11.2024 ein Workshop in den Räumlichkeiten der UWB organisiert, siehe beigefügtes Foto. Ziel des Workshops war es, die Fortschritte des Projekts zu präsentieren und die Bedürfnisse der Zielgruppen weiter zu präzisieren. Das heißt, was das Projektergebnis (Feedback-Trainingssystem) aus der Sicht der Endnutzer erfüllen sollte. An diesem Workshop nahmen wiederum Vertreter aller Projektpartner teil sowie eingeladene Vertreter der Fachöffentlichkeit aus den Reihen der "Stakeholder", d.h. der interessierten Kreise einschließlich der Zielgruppen. Dazu gehörten Ärzte und medizinisches Personal, Fachleute aus der Physiotherapie sowie Vertreter von Entwicklungsagenturen, Clustern und Studenten.
Während des dritten Überwachungszeitraums, d. h. vom 1.1.2025 bis zum 30.9.2025, wurde das Projekt in enger Zusammenarbeit zwischen der tschechischen und der bayerischen Seite fortgesetzt.
Im Bereich der Modellierung wurden die virtuellen Modelle der beteiligten Partner ZČU (CZ) und OTH (DE) weiter verbessert. Die Modellansätze ergänzen sich insofern gegenseitig, da es sich um ein Submodell der Kontraktion der Beckenbodenmuskulatur auf Seiten der ZČU und ein muskuloskelettales Modell auf Seiten der OTH handelt. Als Grundlage für die Entwicklung dieser Modelle dient das medizinische Fachwissen eines weiteren Partners, der LF UK (CZ). Die Ergebnisse dieser Zusammenarbeit wurden der Fachwelt auf der bedeutenden internationalen wissenschaftlichen Konferenz der International Society of Biomechanics 2025 vorgestellt, die vom 27. bis 31.7.2025 in Stockholm, Schweden, stattfand.
Das Hauptziel des Projekts ist die Entwicklung eines Trainingsinstruments, das dazu dient, die Beckenbodenmuskulatur effektiv zu trainieren.. Im Laufe des dritten Überwachungszeitraums wurden umfangreichere Messungen mit Freiwilligen an der OTH durchgeführt, um relevante Daten zur Simulation und Berechnung der Belastungen des Beckenbodens zu erhalten, die bei der Entwicklung des Geräts weiterverwendet werden sollen. Bei diesen Messungen wurden auch Daten über die Gesamtbewegung des menschlichen Körpers und Ultraschalldaten erfasst, anhand derer die Kontraktionen der Beckenbodenmuskulatur direkt überprüft werden können.
Der Verlauf des Projekts und seine Ergebnisse wurden nicht nur Fachleuten, sondern auch der breiten Öffentlichkeit vorgestellt, beispielsweise beim Tschechien-Bayern-Tag in Vimperk am 21.6.2025 und beim Tag der Wissenschaft auf dem Náměstí Republiky in Pilsen am 19.9.2025.
Read more Actual Achievements (EN): The main aim of this project is to contribute to the prevention of pelvic floor dysfunctions. The project will use advanced technologies to develop a prototype of a feedback training system. This will allow to evaluate the effect of prescribed exercises and daily movements on pelvic floor load in a non-invasive way. The data obtained will serve the end user to determine appropriate exercises for the prevention of pelvic floor disorders.
In order to achieve this goal, collaboration between experts from several disciplines is required. In this project, teams from OTH Regensburg (GER), ZČU (CZ) and LF UK (CZ) are collaborating. OTH are experts in musculoskeletal models and motion capture, while their midwifery department contributes with medical knowledge. Teams from the NTC and FDU are involved within the ZČU. NTC has extensive experience in human body modelling and sensor development, FDU is responsible for the design of the solution. An indispensable partner in this project is the Faculty of Medicine of the Charles University providing the necessary medical expertise. To ensure a truly strong collaboration, regular project meetings have been set up on a monthly basis. These are attended by all project partners discussing current work activities and tasks.
The first monitoring period was set for 12.12.2022 - 31.3.2024, however, the project itself started on 1.7.2023. This date was the start of the preparatory work of the individual partners within the framework of the defined activities. The first joint meeting of all partners took place on 8.8.2023 at the University of West Bohemia, where the partners set specific tasks. The main ones within the first monitoring period included, for example, the development of a pelvic floor load model and the development of a submodel of pelvic floor muscle contraction. In these activities, experts from the NTC ZČU collaborated with their German partners from OTH to develop complementary models. The outputs of the OTH musculoskeletal model will serve as input data for the contraction model being developed at the NTC. Overall, this modeling activity is essential for understanding how pelvic floor muscle contraction relates to measurable movements of selected points (called landmarks) on the body surface. A necessity in the development of the biomechanical models was close collaboration with physicians from the Faculty of Medicine, who contribute their knowledge in the development of the model geometry and the identification of relevant muscles and their functions.
An important milestone during the first monitoring period was the organisation of a workshop on 5.12.2023 at the FDU, see attached photo. The purpose of the workshop was to present the main goal and ideas of the project to the professional community and to discuss the needs of the target groups. That is, what the project output (feedback training system) should meet from the perspective of the end users. This workshop was attended by representatives of all project partners and invited representatives of the professional public from the ranks of stakeholders, i.e. interested parties including target groups. These included doctors and medical staff, physiotherapy professionals as well as representatives of development agencies, clusters and students. The output of the workshop, a set of requirements for the sensing system, thus drew on a broad base of participants and provided data for the development of the device design. A similar workshop was also organised on the German side in Regensburg on 14 March 2024. Engineers and scientists from the biomechanical laboratory met with medical experts from physiotherapy, obstetrics, osteopathy and anatomy to discuss their requirements and needs for a preventive tool.
Using all this knowledge, including the expertise of the doctors of the Faculty of Medicine of the Charles University and expertise from the midwifery department of the OTH, the development of the scanning system was started. This is the first phase of the development of the training tool. The sensing system will evaluate the movements of established landmarks during the training. This development has been initiated in collaboration between the FDU and NTC teams with input from the LF UK.
During the second monitoring period, i.e. 1.4.2024 - 31.12.2024, the project was carried out in a smooth continuity with the work in the previous period. In particular, there were two directions that were developed within the project.
In the area of modelling, the virtual models of the involved partners UWB (CZ) and OTH (DE) were further developed and improved. On the UWB side, the submodel of pelvic floor muscle contraction continued to be developed, while on the OTH side, the musculoskeletal model was developed and improved. The two modeling approaches are complementary, i.e., the outputs from the OTH musculoskeletal model will serve as inputs to the UWB submodel. Close collaboration between the UWB and OTH is necessary to ensure harmonization of the two modeling approaches. An indispensable partner in this area is the Faculty of Medicine of the Charles University (CZ) providing medical expertise. Interim results of this collaboration were presented at a major European conference on biomechanics, ESB 2024.
The main goal of the project is to develop a training tool for proper exercise of the pelvic floor muscles. During the second monitoring period, the first physical prototype was designed and created. For this, the knowledge gained in the previous period was used. The prototype was developed at the University of West Bohemia. The first testing of its functionality took place.
As in the first period, a workshop was organized during the second period on 19.11.2024 on the premises of ZČU, see attached photo. The purpose of the workshop was to present the progress of the project and to further refine the needs of the target groups. That is, what the project output (feedback training system) should meet from the point of view of the end users. This workshop was again attended by representatives of all project partners and also by invited representatives of the professional public from the ranks of "stakeholders", i.e. interested parties including target groups. These included doctors and medical staff, physiotherapy professionals as well as representatives of development agencies, clusters and students.
During the third monitoring period, i.e. January 1, 2025 – September 30, 2025, the project continued to be implemented in close cooperation between the Czech and Bavarian sides.
In the area of modeling, the virtual models of the participating partners UWB (CZ) and OTH (DE) were further improved. The modeling approaches complement each other, as they involve a submodel of pelvic floor muscle contraction on the part of the University of West Bohemia and a musculoskeletal model on the part of the OTH. The medical expertise of another partner, the Faculty of Medicine of Charles University (CZ), serves as the basis for the development of these models. The results of this collaboration were presented to the professional community at the prestigious International Society of Biomechanics 2025 conference, which took place on July 27-31, 2025, in Stockholm, Sweden.
The main objective of the project is to develop a training tool for proper pelvic floor muscle exercise. During the third monitoring period, extensive measurements were started with volunteers at OTH to obtain relevant data on pelvic floor load, which will be further used in the development of the device. During these measurements, data on the overall movement of the human body and ultrasound data were also obtained, on which pelvic floor muscle contractions can be directly verified.
The progress of the project and its results were continuously presented not only to experts but also to the general public, for example at the Czechia-Bavaria Day event in Vimperk on June 21, 2025, and at the Science Day event at Náměstí Republiky in Plzeň on September 19, 2025.
Read more Project outputs:
Unterstützte Unternehmen(DE)
Podpořené podniky(CS)
Unterstützte Unternehmen(DE)
Podpořené podniky(CS)
Zapojení partneři projektu(CS)
Beteiligte Projektpartner(DE)
Inovační síť(CS)
Innovationsnetzwerk(DE)